|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PULSEJACK 2x1 RJ45 Description: TM www.pulseeng.com The 2x1 is a Through Hole (THT) Integrated Connector Module. The internal magnetics are designed to support 10/100/1000Base-TX applications such as LAN-on-Motherboard (LOM) and PC applications. Features and Benefits: RoHS-5 peak wave solder temperature rating 235C RoHS-6 peak wave solder temperature rating 260C LAN interface suitable for 10/100/1000Base-TX applications 2x1 RJ45 design saves on PCB real estate RJ45 connection meets CAT3, 5e & 6 Fast Ethernet performance standard Electrical Performance Summary: Meets IEEE 802.3 specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25C -- Operating Temperature 0C to +70C RoHS-5 3 Compliant Part No. RoHS-6 4 Compliant Part No. Turns1,2 Ratios Insertion Loss TX/RX (dB MAX) 1-65 MHz 1-10 MHz Data Rate Return Loss @ 100 15 (dB TYP) 30 MHz 60-80 MHz 1-10 MHz Crosstalk (dB MIN) 32-60 MHz 60-100 MHz Common Mode Rejection (dB TYP) 1-50 MHz 50-130 MHz Hipot (Vrms) (MIN) @60Hz 1 MIN TX RX JC0-0019 JC0-0019NL 10/100/1000 1CT:1 1CT:1 -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 NOTES: 1. Both transmit and receive channels meet IEEE 802.3 specifications. 2. Different electrical specifications can be accommodated. For more information, please contact Pulse. 3. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. 4. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). RJ45 Durability Testing Rating Part Number JC Series Mating Force (MAX) 5lbs./2.268kgs. Unmating Force (MAX) 5lbs./2.268kgs. Durability 500 Insertions Plug to Jack Retention (MIN) 20lbs./9.072kgs. RJ45 Material Specification Part Number JC Series Shield Material Brass Finish 20-40 inches thick nickel over brass Material Phosphor Bronze Contact Plating Area 15 inches gold over 30-80 inches nickel Solder Area 75-300 inches tin-lead over 75-300 inches bright nickel Material Housing Specification UL 94 V-0 Thermoplastic Notes: Connector dimensions comply with FCC dimension requirements. USA 858 674 8100 * Germany 49 7032 7806 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 769 85538070 * Taiwan 886 3 4641811 www.pulseeng.com 1 J422.B (6/06) PULSEJACK 2x1 RJ45 JC0-0019 TM www.pulseeng.com Mechanical 1 3 5 7 9 2 4 6 8 10 2 4 6 8 10 1 3 5 7 9 Weight . . . . . . . . . . .8.1 grams Tray . . . . . . . . . . . . . . .45/tray USA 858 674 8100 * Germany 49 7032 7806 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 769 85538070 * Taiwan 886 3 4641811 www.pulseeng.com 2 J422.B (6/06) PULSEJACK 2x1 RJ45 JC0-0019 TM www.pulseeng.com Schematic VCC MD3 MX3 - MD3 + MD2 - MX3 + MX2 - MD2 + PCB connections to the Physical Layer IC MD1 - MX2 + CABLE MX1 - MD1 + MD0 - MX1 + MX0 - MD0 + MX0 + USA 858 674 8100 * Germany 49 7032 7806 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 769 85538070 * Taiwan 886 3 4641811 www.pulseeng.com 3 J422.B (6/06) PULSEJACK 2x1 RJ45 10/100/1000 IC PHY VCC MD3 + 100W MD3 MD2 + 100W MD2 MD1 + 100W MD1 MD0 + 100W MD0 MD0 100W MD0 + MD1 100W MD1 + MD2 100W MD2 + MD3 100W MD3 + VCC 100 nF TM www.pulseeng.com JC0-0019 Application Circuit 10 10 9 8 8 7 6 6 5 4 4 3 2 2 1 LOWER Port LOWER UPPER 9 7 5 3 1 UPPER Port 50W Resistor Network 50W 10 nF 100 nF PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50 connections. 2. Connections to ground should be as short as possible. 3. Connections between the 10/100/1000 IC and the connector should be direct (ideally no change in direction) and of minimum length. For More Information: Pulse Worldwide Headquarters 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 49 7032 7806 116 Fax: 49 7032 7806 135 Pulse China Headquarters No. 1 Industrial District Changan, Dongguan China Tel: 86 769 85538070 Fax: 86 769 85538870 Pulse North China Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China Tel: 86 21 54643211/2 Fax: 86 21 54643210 Pulse South Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 Tel: 65 6287 8998 Fax: 65 6280 0080 Pulse North Asia No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. Tel: 886 3 4641811 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2006. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 4 J422.B (6/06) |
Price & Availability of JC0-0019 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |